Family-owned paving & masonry contractor serving New Jersey for 30+ years · Licensed & insured

Serving Martinsville & Somerset County

Driveway Services in Martinsville, NJ

New asphalt, paver and concrete driveways, plus widening, Belgian block, repairs and sealcoating for Martinsville, NJ homes.

30+ Years

Three decades paving NJ properties

Licensed & Insured

Fully licensed NJ contractor

Family-Owned

Owner-led, hands-on projects

Free Estimates

Written, no-obligation quotes

Martinsville, NJ

Driveway Services for Martinsville properties

Quick answer

Old Irish Paving & Masonry installs, replaces, widens and repairs driveways in Martinsville, NJ, in asphalt, interlocking pavers, concrete and Belgian block. Every driveway is built on excavated, compacted stone base with drainage set away from your garage and home. Most asphalt driveways are completed in 1–2 days.

Martinsville driveways are often long and steep, so we pitch them carefully, add trench drains at the garage when needed and use Belgian block edging to protect the edges from runoff.

Steep grades and wooded lots in Martinsville mean runoff, tree roots and shale soils all affect how paving is built. That’s why every driveway we build starts with removing the old surface and soft soil, then installing and compacting a new stone base before a single inch of asphalt or paver goes down.

New blacktop driveway installed by Old Irish Paving

Key facts

  • Location: Martinsville, Somerset County, NJ
  • Areas: Martinsville and the Washington Valley area
  • Service: Driveway Services
  • Experience: 30+ years · family-owned
  • Credentials: Licensed & insured · all work guaranteed
  • Estimates: Free & written · (908) 992-2345

Problems we solve

Common Martinsville problems and how we solve them

These are the issues we’re called about most in Martinsville and nearby Somerset County: some are specific to local soils, terrain and housing, others are common across New Jersey.

Steep wooded driveways

What you seeLong sloped drives with roots lifting asphalt and runoff carving the edges.

Why it happensSteep grades on wooded lots in the Washington Valley area.

How we fix itRoot management, heavier base, careful compaction on the grade, Belgian block edges and drainage at the bottom.

How to prevent itKeep gutters, swales and drains clear of leaves.

Back yards that fall away from the house

What you seeHard-to-use yards with eroding slopes.

Why it happensHilly terrain.

How we fix itRetaining walls and terraced patios with steps, designed with drainage behind every wall.

How to prevent itPlant slopes and direct downspouts away from walls.

Leaf-clogged drains and stained pavers

What you seeTannin stains on patios and blocked drains every fall.

Why it happensHeavy tree cover.

How we fix itCleaning, sealing pavers for stain resistance, and drain grates that are easy to clear.

How to prevent itBlow off leaves weekly in fall.

A trip hazard where the driveway meets the walkway or street

What you seeA lip has formed at the apron, the sidewalk or the garage slab.

Why it happensDifferent materials settle at different rates, and tree roots and frost lift edges.

How we fix itWe remove and rebuild the transition with a compacted base. At the street we can install a Belgian block or paver apron that ages well.

How to prevent itMake transitions part of the original design rather than an afterthought.

Alligator (spider-web) cracking

What you seeA patch of interconnected cracks that looks like reptile skin, usually in wheel paths or near the garage.

Why it happensThe base underneath has failed. Water got through surface cracks, softened the stone and soil, and the asphalt is now flexing under every car. It’s a structural failure, not a surface one.

How we fix itWe saw-cut around the failed area, dig out the asphalt and the wet base, install and compact new stone, then patch with hot-mix asphalt. If more than about a quarter of the driveway looks like this, full replacement is the better value.

How to prevent itSeal cracks as soon as they appear, keep downspouts discharging away from the driveway, and sealcoat every 2–3 years.

White haze, stains and faded color

What you seeChalky white film (efflorescence), oil spots, rust marks or dull color.

Why it happensEfflorescence is natural salts migrating out of concrete pavers. Oil and rust come from cars, fertilizer and furniture, and UV fades color over time.

How we fix itWe clean with the correct product for each stain, then optionally apply a sealer to enhance color and make future cleaning easier.

How to prevent itWipe up oil quickly, keep fertilizer off pavers, and seal if you want a richer, easier-to-clean surface.

New blacktop driveway installed by Old Irish Paving

Driveway services in Martinsville

How we build a driveway that lasts

  1. Remove and haul away the old driveway
  2. Excavate soft soil and shape the subgrade for drainage
  3. Install geotextile fabric where soils are soft
  4. Spread and compact the stone base in lifts
  5. Pave with hot-mix asphalt, or set pavers on a screeded bed
  6. Finish edges and transitions, then clean up
Driveway paving project completed in New Jersey

Our process

How your Martinsville project works

1

Free site visit

Tom or a family member walks the property, measures, checks drainage and talks through materials and budget.

2

Written quote

You get a clear, itemised quote covering excavation, base depth, materials, finish and clean-up. No pressure.

3

Expert installation

Our own crew excavates, builds the compacted base and installs the surface using quality materials.

4

Walk-through & guarantee

We clean up, walk the finished job with you, explain aftercare and stand behind the work.

Repair or replace your Martinsville driveway?

Isolated cracks, small potholes and faded asphalt are usually fixed with crack filling, patching and sealcoat. Widespread alligator cracking, sunken tire tracks, broken edges and standing water mean the base has failed, and replacement is the better value. We’ll walk the driveway with you and explain what we see.

Plan with confidence

Before you start: costs, mistakes & maintenance

What affects the cost

  • Martinsville site conditions: Steep grades and wooded lots in Martinsville mean runoff, tree roots and shale soils all affect how paving is built.
  • Borders and aprons: Belgian block, pavers
  • Permits for widening or curb-cut changes, where your town requires them
  • Material: asphalt is usually lowest, concrete mid-range, and pavers highest
  • Tear-out and disposal of the existing driveway
  • Excavation and base depth, which depend on soil and vehicle loads

Mistakes to avoid

  • Hiring a door-to-door “leftover asphalt” crew
  • Choosing material on price alone without considering maintenance and lifespan
  • Forgetting to plan where the water will go
  • Widening without checking town rules on width and curb cuts

Reviews

What New Jersey Homeowners Say

★★★★★

I met with the owner Thomas, who gave me ideas and choices for the look I was trying to envision. The crew tore up my old cracked concrete patio and sidewalk and installed gorgeous new pavers. They did the work promptly and professionally and cleaned up well after the jobsite.

— Dawn G., Google review

★★★★★

Last month they did my backyard stoop, patio and walkway, and added a french drain to a sump pit in the yard. They did an amazing job! I highly recommend them for any paving and masonry work. Tom and crew are a pleasure to deal with.

— Bill P., Google review

★★★★★

Tom, his son, and their crew replaced our front walkway and steps and repaired a foundation wall on our home. They were here on time every morning and cleaned up before they left for the day. The quality of their work is outstanding.

— Kate L., Google review

FAQ

Frequently Asked Questions

How long does it take to replace a driveway in Martinsville?

Most asphalt driveways take 1–2 days. Paver driveways take about 3–7 days, and concrete takes 3–5 days plus about a week of curing.

Do I need a permit to widen my driveway?

Often yes. Many New Jersey towns, Martinsville included, regulate driveway width, curb cuts and work in the road right-of-way. We’ll confirm what’s needed.

Can you fix water running down my driveway into the garage?

Yes. On Martinsville’s sloped lots we often install a trench drain in front of the garage, regrade the driveway and redirect water to a swale or dry well.

Can you add Belgian block to my driveway?

Yes. Belgian block curbing and aprons can be added to new or existing driveways.

Should I sealcoat every year?

No. Every 2–3 years is right for most driveways. Sealing too often builds up a film that can crack and peel.

How do I stop water from running into my garage?

Regrade the driveway so it pitches away from the garage, or install a trench drain across the driveway in front of the door, piped to a dry well or daylight.

Free, no-obligation quote

Get a free estimate in Martinsville

Tell us about your driveway, patio, steps or masonry project. Tom or a member of the family will call you back promptly to book a free on-site visit and a written quote.

Prefer to talk? (908) 992-2345

Request a quote